Top lights
Outdoor strip · IP68 · self-adhesive · Lotus Lantern

AILBTON Self-Adhesive Outdoor Strip IP68

An IP68-sealed RGB strip with tape on the back, so it sticks straight to railings, soffits and pool edges, then fills the garden with colour that follows the party playlist.

  • Lengths60ft, 200ft or 400ft
  • Water ratingIP68 tube casing
  • MountingSelf-adhesive back, clips and screws
  • ControlLotus Lantern app + IR remote
  • Power24V ETL-certified adapter
Lights up
  • Decks, balconies, pergolas and pool surrounds
  • Smooth surfaces where tape saves drilling
  • Very long runs, up to 400ft
Pass on it for
  • Rainbow chasing: the strip is single-colour RGB
  • Rough brick or timber where adhesive alone will not hold
See the glow
Lengths & sets

Choose your length

Peel, press and the deck rail glows

Most outdoor strips arrive with a bag of clips and a lot of screwing. This AILBTON version adds a self-adhesive back to the same IP68 tube, so on a smooth railing, fascia board or pool coping the strip goes up almost as fast as you can walk the run. Clips and screws are still in the box for the spots where tape needs help.

The strip lives inside a sealed IP68 tube. That rating covers dust-tight sealing and immersion beyond a metre, to the maker's own test conditions, so rain, sprinklers and pool splash are part of normal life. The adapter end uses a waterproof cable joint, and the 24V supply carries ETL safety certification.

Where the adhesive back earns its keep:

  • Aluminium and vinyl railings, smooth and easy to clean before sticking.
  • Painted fascia and soffit boards, for a clean roofline glow.
  • Pool and hot-tub surrounds, lighting the edge without drilling tiles.
  • Under-bench and step edges on the patio, where the light washes the floor.

Colour is RGB, meaning the whole run shows one shade at a time from a palette of 16 million. A warm white-ish amber for dinners outside, a deep blue for a pool evening, or a slow fade through the rainbow when guests arrive. The tube also softens each LED a little, so the line reads as a glowing band from across the garden rather than a row of bright dots.

Glue after cutting: trimming to fit is allowed, but a fresh cut opens the waterproof tube. Seal the end with glue before it goes outside, or water will creep in and kill the last section.
Light specs

Every wire and watt

SpecValue
FormLED strip in an IP68 waterproof tube
Lengths60ft, 200ft, 400ft
ColourRGB, 16 million colours, one colour at a time
Water ratingIP68, indoor and outdoor
MountingSelf-adhesive backing, plus buckles and screws
CuttableYes; seal the cut end with glue to keep it waterproof
AppLotus Lantern (Bluetooth), iOS and Android
App modesMusic sync, mic mode, timer, scenes
RemoteIR remote, range up to 32.8ft
ControllerInline controller with push button
Voltage24V low voltage
Power adapterETL-certified, waterproof cable at the adapter joint
Warranty180 days (60ft, 200ft), 90 days (400ft)

Sizing the run from 60 to 400 feet

The three lengths share the same strip, controller and app. What changes is how much of the garden you can wrap. Walk the route with a tape measure first, counting every corner, post and rise, because outdoor runs always turn out longer than they look.

LengthTypical runWarranty
60ftA balcony rail or one side of a deck180 days
200ftA full deck perimeter or a pergola180 days
400ftRooflines, fences and large gardens90 days

Bigger is not always better. A 400ft reel is heavy to handle on a ladder, and any length beyond the path is cut off and wasted. If the run is 150ft, the 200ft strip leaves room for mistakes without a pile of offcut.

Planning notes for each size:

  • 60ft: plug in near the start of the rail and hide the adapter behind a planter.
  • 200ft: plan where the controller sits so the remote can reach it; the IR range is up to 32.8ft in line of sight.
  • 400ft: map the whole route first and start from the outlet end, so the controller and adapter stay together.
Remote reach: infrared only works when nothing blocks its path to the controller box. If the box sits behind a planter or under a deck board, use the app instead, which works over Bluetooth.

Whatever the length, keep the adapter under cover. The strip is sealed; a power brick on the lawn is not. A weatherproof outlet box or a spot under the eaves keeps it dry, and the plug end of the run should start there so no bare cable crosses the path.

Among its siblings

Where it glows in the lineup

ELK-BLEDOM light models by kind, September 2026. Highlighted: AILBTON Self-Adhesive Outdoor Strip IP68.

Patio party on Lotus Lantern music sync

Outside, the music usually comes from the phone or a portable speaker, and the AILBTON strip can follow either. It runs from Lotus Lantern, the app paired with the ELK-BLEDOM controller. Phones list that controller by its Bluetooth name, so the strip is sometimes taken for a speaker at first.

Skip the settings menu entirely. Power the strip, launch Lotus Lantern with Bluetooth enabled, and the controller pops up ready to use. The pairing guide has the fixes when it hides, and the Lotus Lantern notes explain each mode in detail.

The modes that work best outdoors:

  • Music sync: the app plays tracks from the phone and the strip changes colour with them.
  • Mic mode: the controller listens to the garden, so a speaker across the lawn or a table of singing friends drives the light.
  • Timer: on at sunset, off at midnight, all season long.
  • Scenes: ready-made fades and jumps for birthdays and holidays.

For a birthday, set the timer so the rail glows as guests arrive, then switch to mic mode once the music starts. For a quiet night in the hot tub, pick a single colour and drop the brightness. The IR remote is the one to leave on the outdoor table, so anyone can change the colour without a phone.

Holidays are where a long outdoor run pays off. Pumpkin orange for Halloween, deep red for December, team colours jumping in turn on match day: switch the scene in seconds and the whole deck changes costume with it.

Mic tip: the microphone sits in the controller. Keep the controller somewhere it can hear the music, sheltered from rain but not boxed in.
Other moods

Three more ways to glow

The 100ft buckle-mount twin1 AILBTON IP68 Outdoor Strip Lights
AILBTON IP68 Outdoor Strip Lights
AILBTON's popular 100ft IP68 strip shares the app and remote, fixed with buckles and straps.
  • Runs on the Lotus Lantern app
  • 100ft
  • Pulses to music from its own mic
See the glow

Adhesive AILBTON or the 100ft buckle version

AILBTON sells two outdoor strips that look almost alike. The self-adhesive one here comes in 60, 200 and 400ft; the AILBTON IP68 100ft strip mounts with buckles, straps and glue, and is the more popular of the pair. Both share the IP68 tube, 24V adapter, remote and Lotus Lantern app.

How to choose between them and the other long outdoor runs:

  • This adhesive AILBTON suits smooth, clean surfaces and anyone who wants fewer screw holes.
  • The 100ft AILBTON suits rough timber, stucco or brick, where mechanical fixing holds better.
  • HUEMIHUI IP68 100ft is another IP68 run on the same app, a good cross-check at the 100ft mark.
  • FBZ permanent outdoor lights go to 300ft for rooflines that stay up all year.

Tape outdoors has limits. Before sticking, check four things:

  1. Surface: smooth and sealed. Clean it with rubbing alcohol and let it dry.
  2. Temperature: stick on a mild, dry day. Cold surfaces and damp mornings weaken the bond.
  3. Sun and heat: on south-facing rails, add a clip every few feet as backup.
  4. Direction: mount the strip so rain runs off the tube, not along it to the cut end.
Belt and braces: use the adhesive for a clean line and the included buckles at corners and ends, where the strip wants to pull away.

Garden, living-room and car glows from the same app family are grouped by spot on the ELK-BLEDOM main page.

Glow questions

Hook-up questions

Can the AILBTON adhesive strip be cut?

Yes. Seal the cut end with glue before using it outdoors, or water can get into the tube.

Does the self-adhesive back hold outdoors?

On smooth, clean, dry surfaces it does. On rough wood or brick, or in strong sun, add the included buckles and screws.

Is the adapter waterproof too?

The strip is IP68 and the adapter joint uses a waterproof cable, but keep the adapter and controller under cover.

How far does the remote reach?

The IR remote works up to about 32.8ft as long as nothing stands between it and the controller. The app works over Bluetooth when the box is hidden.