Ten 20in arms and one 60in trail that turn a wall into a firework in full bloom, sparkling in several colours at once and flashing in time with the party.
The Daymeet smart firework is a wall display built from eleven LED strips. One 60in strip rises as the trail, and ten 20in strips spread from the top like the petals of a burst. Every bead line carries IC chips, so each arm can show several colours at once and the whole shape sparkles the way a real firework does in the sky.
With 213 dynamic modes, the burst can open slowly in pastel colours, crackle in gold and red, or spin a full rainbow round every arm. The effects are designed to look like a firework in full bloom, repeating without the smoke or the noise.
Eleven arms make a burst that fits above a single bed, a desk or a sofa without swallowing the wall. It works as a centrepiece in a teenager's bedroom, a backdrop for party photos, or a seasonal decoration that swaps from Christmas red and green to Halloween orange and purple with a tap.
At low brightness the slow modes become a calming night light for children, the burst opening and closing like a breath. At full brightness with music sync on, it is the loudest-looking decoration in the room.
Because each arm is a separate strip, the shape is yours to decide. Spread the ten arms in a perfect circle for a classic chrysanthemum shell, or bunch them upward into a willow that droops at the ends.
| Spec | Value |
|---|---|
| Strips | 11: 10 × 20in and 1 × 60in |
| LEDs | 150 |
| Colour type | RGB with IC chips, several colours at once |
| Colours | 16 million |
| Dynamic modes | 213 |
| App | duoCo StripX (Bluetooth) |
| Sound reaction | Built-in microphone, adjustable sensitivity; music and mic modes |
| Remote | 24-key, 360°, 40–50ft range |
| Inline control | 3-key control box |
| Timer | Yes, in the app |
| Voltage | 5V |
| Rated power | 4.6W |
| Mounting | High-tack adhesive backing |
| Water resistance | Not water resistant, indoor use |
| Part number | DM-BT03-YHD11-US |
| In the box | Firework strips, control box, 24-key remote |
Flip on mic mode in duoCo StripX and the firework starts reacting to the room. Its microphone, tunable from twitchy to relaxed, hears the music, the chatter and the countdown, and the burst changes colour with every beat. Turn the sensitivity down for a quiet film night, up for a dance floor.
Each of the three controls has its moment. The app carries everything: colours, brightness, speed, modes, mic mode and the timer. The 24-key remote works in any direction at 40 to 50 feet, so the light show can be run from the far end of a party. The 3-key box on the lead handles power and steps through modes.
DIY mode builds custom bursts: pick colours for the arms, set the speed and save the scene for next year's party.
Speed is the other secret ingredient. Slow bursts feel like a distant display seen from a hillside, fast ones like standing right under the launch site. Matching the speed to the playlist, slow for ballads and quick for dance tracks, makes the wall feel choreographed.
Hanging a firework is part craft project, part lighting. The strips come with high-tack adhesive, and the only tools needed are a cloth and a steady hand. Start by choosing where the burst will open, since the trail runs down from there toward the power source.
An even spread of ten arms reads most clearly as a firework. For a playful look, cluster them to one side or angle the trail as if the rocket was launched from a corner. A quick sketch on paper, with the wall measured, saves re-sticking.
Power comes in at the bottom of the trail, so the closer the trail ends to a socket, the less cable shows on the wall. A slim cable raceway painted to match the wall hides any remaining run and keeps the firework looking like it floats.
Behind a headboard is a favourite spot. The trail drops neatly behind the bed, the cable disappears, and only the burst shows above the pillows, glowing in whatever colour ends the day.
Several firework lights sit in the family, and the Daymeet smart firework is the compact all-rounder of them. It has three fewer arms than FanGera, but a long-range remote, a 3-key box and duoCo StripX, the same app as many strips and lamps here. That shared app is the deciding point for many homes.
| Firework light | Strips | App | Remote |
|---|---|---|---|
| Daymeet smart firework | 11 (10 × 20in, 1 × 60in) | duoCo StripX | 24-key |
| FanGera firework | 14 (13 × 19.7in, 1 × 59in) | Magic Lantern | 40-key |
| DTQJ smart firework | 11 (10 × 19.6in, 1 × 60in) | duoCo StripX | 24-key |
| Daymeet launch effect | Launch-style strip | duoCo StripX | Remote |
Questions to settle before ordering:
It makes a fine present for a teen who has run out of wall ideas or a family that goes big on holiday decorating. Scenes, DIY mode and timers are laid out in the duoCo StripX rundown, and the full collection has every strip and lamp that shares the app.
The DTQJ firework is its nearest twin on paper, with the same count of arms and the same app. DTQJ's arms are flexible silicone and it runs from any USB power source you supply, while the Daymeet's remote is rated for 40 to 50 feet in any direction. Both carry a 3-button box on the lead. Pick by the details that matter in your room, such as bendable arms or reach from the sofa.
It has ten 20in strips for the burst and one 60in strip for the trail, so plan about 80in of wall height.
duoCo StripX, over Bluetooth, with 213 dynamic modes, mic mode and a timer.
The 24-key remote works in any direction at 40 to 50 feet.
No. Rain and damp would reach the bare strips; it is made for indoor walls and ceilings.