Top lights
TV backlight · 6 pre-cut pieces · 43–65in

HOUHUI Pre-Cut TV Backlight Kit

Instead of one long strip bent round the corners, HOUHUI ships six short RGB pieces and five connector cables, so each edge of the TV gets its own straight run of colour.

  • Pieces6 × 1.64ft (50cm), about 10ft total
  • Fits43–65in TVs
  • LEDs5050 RGB, 150 in total
  • AppduoCo Strip
  • Control24-key RF remote, 3-button box
  • PowerUSB 5V, 10W
Lights up
  • Mid-size TVs from 43 to 65 inches
  • Tidy corners without folding strip
  • A layout you can change: TV today, monitor or shelf tomorrow
Pass on it for
  • Screens over 65 inches: a 16.4ft backlight covers more edge
  • Multi-colour chase effects: this kit shows one colour at a time
  • Anywhere damp: it carries no water rating
See the glow

Tidy corners from HOUHUI's six pre-cut pieces

The awkward part of any TV backlight is the corner. A single long strip has to fold at each one, and a crease can crack a trace or leave a bright kink in the glow. HOUHUI side-steps the problem: the kit arrives as six 1.64ft pieces with five connector cables, so the strips run straight along each edge and a short cable jumps the corner.

One piece is special. It carries the USB plug and the 3-button controller, so it is the first link in the chain and should sit nearest the TV's USB port. The other five are plain 4-pin RGB strips that plug in one after another.

What comes in the box:

  • 1 × 1.64ft USB-powered strip with 3-button controller
  • 5 × 1.64ft 4-pin RGB strips
  • 5 connector cables
  • 1 × 24-key RF remote
  • User manual

Each strip carries 5050 RGB LEDs, 150 across the set, bright enough to colour the wall behind a mid-size TV. The glow is one colour at a time along the whole chain: static colours, fades, jumps and music modes, all dimmable.

Bias lighting of this kind puts a soft level of light behind the screen, which reduces the contrast between a bright picture and a dark wall. HOUHUI pitches it for easing eye strain during long viewing, and many people simply like how it makes the picture look deeper.

Like other duoCo Strip controllers, it can appear in a Bluetooth scan labelled ELK-BLEDOM. It is the strip's controller talking, not a speaker. The in-app pairing steps get it talking to the phone in a minute.

Light specs

Every wire and watt

SpecValue
ModelUS-6x50cm
Pieces6 × 1.64ft (50cm) strips
Total lit lengthAbout 10ft (3m)
Screen fit43–65in TVs
LEDs5050 RGB, 150 in total
Colours16 million static colours
Dynamic modes28
DimmableYes
AppduoCo Strip (Bluetooth)
Remote24-key RF
Inline control3-button controller on the USB piece
Music syncColour and mode follow the beat
PowerUSB, 5V
Rated power10W
Connectors4-pin, 5 connector cables included
MountingSelf-adhesive tape
MaterialsMetal, polycarbonate, vinyl
Weight3.2oz
Water resistanceNot water resistant
WarrantyOne year

Laying HOUHUI's strips on a 43 to 65 inch frame

A 43-inch TV is roughly 37.5 by 21 inches, about 9.7ft around the edge. The six pieces add up to about 9.8ft of lit strip, so on a 43 they cover close to the whole outline and sit near the rim. A 65-inch set runs near 57 by 32 inches, almost 15ft of edge; there the pieces spread out, and the connector cables carry the gaps between them.

TV sizePanel, roughlyEdge lengthLit strip covers
43in37.5 × 21inabout 9.7ftnearly all of it
55in48 × 27inabout 12.5ftaround three-quarters
65in57 × 32inabout 14.8ftaround two-thirds

Each piece is about 19.7 inches long. On the bigger panels, space them evenly around the frame so the gaps fall in the middle of each edge, where the halo blends across them. On a 43, work close to the rim; if the TV sits on a stand, one piece can leave the bottom edge and light the furniture top instead.

  1. Wipe the back panel clean and dry, then plan the order on a table.
  2. Place the USB piece first, near the port, so its controller hangs within reach.
  3. Run the chain around the frame, set slightly inside the outline of the frame.
  4. Plug each connector in the right direction; 4-pin plugs only work one way round.
  5. Test before sticking, then press each piece down firmly.
Mind the arrows. Each 4-pin strip has a direction and a marked pin order. If one piece stays dark or shows the wrong colour, turn the plug round at that joint before blaming the strip.

Because the kit is modular, it is not tied to a TV. The same six pieces can line a monitor, the underside of a floating shelf or the back of a cabinet, run from any USB port.

Among its siblings

Where it glows in the lineup

ELK-BLEDOM light models by kind, September 2026. Highlighted: HOUHUI Pre-Cut TV Backlight Kit.

HOUHUI's 28 modes for films, matches and music

Twenty-eight moving modes and 16 million static colours sound like a lot, and they are, but most evenings come down to a handful. The 24-key RF remote puts the favourites a thumb away, while the duoCo Strip app handles fine colour picks, the timer and music mode. The 3-button controller on the USB lead is the fallback when both go missing.

Scenes that suit the kit:

  • Film night: a low, warm static colour, dimmed well down, so the wall glows without competing with the picture.
  • Sport: team colours, brightness up, a jump mode at half-time.
  • Gaming: icy blue or violet, low enough that the screen stays the brightest thing in view.
  • Party: music sync on, so colour and mode change with the beat.

Music sync listens to the room, so it follows the soundbar, the speakers or the crowd. It does not read the TV signal or the image. That keeps it simple and works with any TV, streaming box or console.

The RF remote needs no line of sight, a real help when the controller is tucked behind a TV. Buttons on the remote cover colour, brightness and modes; the app adds the timer, custom colours and finer brightness steps.

At 5V and a rated 10W, the kit runs from the TV's USB port on most sets. On TVs that cut USB power in standby, the glow switches off with the picture; on those that keep USB live, the app timer or the remote does the job. The duoCo Strip and Lotus Lantern app notes cover timers and music modes step by step.

Other moods

Three more ways to glow

Smaller TV, one strip1 MATICOD Bluetooth TV Backlight
MATICOD Bluetooth TV Backlight
MATICOD's 9.84ft backlight sticks on in one piece for 32–43in TVs on duoCo Strip.
  • Runs on the duoCo Strip app
  • 9.84ft · 32–43in TVs
  • Pulses to music from its own mic
See the glow
Multi-colour on a 50–55in2 Daymeet RGBIC TV Backlight
Daymeet RGBIC TV Backlight
Daymeet's 13.1ft RGBIC backlight shows several colours at once and runs on duoCo StripX.
  • Runs on the duoCo StripX app
  • 13.1ft · 50–55in TVs
  • Pulses to music from its own mic
See the glow
Shelves and cabinets3 WUYXPG 6 Pre-Cut Strip Light Kit
WUYXPG 6 Pre-Cut Strip Light Kit
WUYXPG's six 12in pre-cut strips come with a 5V USB adapter and a 2.4G music remote.
  • Runs on the duoCo StripX app
  • Pulses to music from its own mic
  • Remote included
See the glow

HOUHUI pre-cut beside one-piece TV strips

Most TV backlights come as one continuous strip. That is quicker to stick on, but every corner means a fold. The HOUHUI kit trades a few extra plugs for straight pieces and tidy corners, plus the freedom to split the light across a TV and a shelf.

  • MATICOD 9.84ft is the popular one-piece strip for 32–43in TVs on the same duoCo Strip app.
  • Daymeet 13.1ft RGBIC adds multi-colour effects for 50–55in screens on duoCo StripX.
  • WUYXPG 6-piece kit is another pre-cut set, 6 × 12in with a USB power adapter, better sized for shelves and cabinets.

Pick the HOUHUI when your TV sits between 43 and 65 inches and you want clean corners, or when the lights might move to a monitor or shelf later. Pick a one-piece strip when speed matters most or when the TV is smaller than 43 inches.

Four points to confirm first:

  1. Your TV's diagonal, and whether it lands inside 43–65in.
  2. A powered USB socket on the set itself, or a spare 5V plug within reach.
  3. Whether one colour at a time is enough, or you want chasing effects.
  4. A smooth, dry back surface for the tape.

Plug count is the one cost of the modular design. Five joints mean five places for a loose connection, so press every plug fully home and route the cables flat against the panel where a wall bracket will not pinch them.

The kit is indoor only and does not sync to the picture. Within those limits it is a neat, flexible way to put a halo behind a mid-size screen. The ELK-BLEDOM TV and room lights also include longer strips for bigger panels.

Glow questions

Hook-up questions

Will the HOUHUI kit fit a 65-inch TV?

Yes, it is sold for 43–65in TVs. On a 65in set the six pieces spread out around the frame with the connector cables bridging the gaps.

Why is the HOUHUI backlight split into six pieces?

Each 1.64ft strip runs straight along an edge and a cable jumps the corner, so nothing has to be folded.

Which app runs the HOUHUI pre-cut kit?

duoCo Strip over Bluetooth. A 24-key RF remote and a 3-button controller are included too.

Can the HOUHUI strips light something other than a TV?

Yes. The pieces can line a monitor, a shelf or a cabinet, powered from any USB port.