Top lights
Permanent eave lights · 400ft · Lotus Lantern

LITSOUL Permanent Outdoor Eave Lights

A 400ft run of lensed LEDs that lives under the roofline all year, washing the walls in holiday colours or a calm white that switches itself on at dusk.

  • Length400ft
  • ColourRGB plus 2700K–6500K white
  • AppLotus Lantern, plus remote
  • Scenes29 presets and music sync
  • WeatherIP65, UV resistant
  • Power24V, 48W
Lights up
  • Long rooflines and wraparound eaves that shorter kits cannot reach
  • Homes that want holiday colours and everyday white from one install
  • Owners who like lights on a daily timer, set once
Pass on it for
  • Multi-colour chase effects: the colour data is plain RGB
  • Rough brick or dusty fascia where adhesive will not grip
  • Small balconies that need a fraction of 400ft
See the glow

400ft of LITSOUL light traced along the roofline

LITSOUL builds these as permanent eave lights: one long run that goes up once and stays there through every season. Each LED sits behind an anti-glare lens that shapes its light into a cone, so the wall below catches soft pools of colour instead of a row of harsh dots. At 400ft, the kit covers the eaves of a large house or wraps several sides of a smaller one.

The trick of a permanent set is range. One evening it paints the front of the house pumpkin orange for trick-or-treaters; the next it settles into plain white for arriving home after dark. LITSOUL gives two kinds of light to play with:

  • Colour: 16 million RGB mixes from the Lotus Lantern app or the remote.
  • White: an adjustable tone from 2700K candle-warm to 6500K daylight-cool.
  • Scenes: 29 ready presets for quick holiday looks.
  • Music sync: the lights pulse with a playlist on party nights.

The white mode can light the front path as well as decorate it. Dim it down for everyday glow and let the walls look warm rather than floodlit. The lensed cone matters here too: it throws light down the siding instead of out towards the street, so neighbours see a glowing house rather than a row of points staring back at them.

The colour data is plain RGB, so expect scenes built from fades, jumps and flashes across the whole run rather than a rainbow racing bead to bead. For many houses that is the calmer look anyway: a single warm red for December, a deep teal for summer evenings, a soft white the rest of the year.

Light specs

Every wire and watt

SpecValue
Length400ft (4,800in)
OpticsAnti-glare lenses with a cone-shaped beam
Colours16 million (RGB)
White lightAdjustable 2700K–6500K
Preset scenes29
MusicMusic-sync mode
AppLotus Lantern (iOS and Android)
RemoteIncluded
TimerDaily on and off schedule
Water resistanceIP65 with an internal sealing strip
UV resistanceYes
Operating temperature-22°F to 140°F
LED lifespanUp to 50,000 hours
Voltage24V
Rated power48W
MountingAdhesive backing; mount 2–4in from the wall
Warranty1 year

Halloween orange to Christmas red on LITSOUL's 29 scenes

A permanent install earns its keep across the calendar. Instead of hauling boxes of clip-on bulbs up a ladder twice a year, the LITSOUL run changes outfit from the phone. The same roofline can serve a birthday, a game night and a quiet Tuesday without anyone touching a gutter.

A year on the eaves might look like this:

  • October: orange and purple scenes for the Halloween crowd.
  • December: red and green, or a crisp cool white that reads like fresh snow.
  • Spring and summer: warm white for barbecues, music sync for a backyard party.
  • Game days and birthdays: team or theme colours saved in the app.
  • Every other night: 2700K white on a timer as a welcome light.

The timer is the quiet hero. Set on and off times once in Lotus Lantern and the lights come up in the evening and shut down later without a thought. That makes the kit feel like part of the house rather than a gadget you need to remember.

LITSOUL's spec sheet rates the run IP65, with UV resistance and an internal sealing strip, and quotes an operating range from -22°F to 140°F. That covers snowy winters and baking summer fascia boards alike.

There are limits to plan around. A 400ft reel is a big commitment for a porch or a single balcony rail; a shorter strip suits those better. Adhesive mounting also asks for a smooth, clean surface, so rough stucco or flaking paint needs attention first. Music sync, too, is a party trick rather than the main event; the scenes, the white tones and the timer are what the lights do on most nights.

Among its siblings

Where it glows in the lineup

ELK-BLEDOM light models by kind, September 2026. Highlighted: LITSOUL Permanent Outdoor Eave Lights.

Mounting LITSOUL under the eave, 2 to 4 inches off the wall

LITSOUL recommends placing the lights 2 to 4 inches out from the wall. That gap lets each cone of light open up before it lands, which is what turns individual beads into those even scallops along the siding. Mount them flush against the wall and the pools shrink into bright spots.

Plan the job on the ground before the ladder comes out:

  1. Walk the roofline and measure every run you want lit, corners included.
  2. Decide where the power supply lives: sheltered, near an outdoor outlet, off the ground.
  3. Clean the soffit or fascia with a dry cloth so the adhesive has a fresh surface.
  4. Peel, place and press each section for about 8 seconds to lock the hold.
  5. Test the run from the app before tidying the cable back to the plug.

The whole system runs at 24V and a modest 48W for the full length, which keeps the wiring low-voltage outside and the power bill small for nightly use. LITSOUL quotes an LED life of up to 50,000 hours, so a run that works on install day has a long future on the house.

For control, download Lotus Lantern and leave the phone's own Bluetooth list alone. Lotus Lantern controllers usually broadcast under the name ELK-BLEDOM, which is why so many people go hunting for a speaker, and the link is made within the app. If the eaves stay dark in the app, the troubleshooting steps help. Timers, scenes and music mode are laid out in the Lotus Lantern and duoCo app guide.

  • Stand within Bluetooth range of the controller when pairing, not across the street.
  • Keep the included remote indoors near the door for quick changes.
  • Save favourite colours as presets before the first party.
Other moods

Three more ways to glow

LITSOUL next to FBZ's 300ft run and two shorter outdoor strips

The closest cousin is the FBZ permanent outdoor set, 300ft on Lotus Lantern with IP65 sealing, 29 dynamic modes and a 44-key remote. FBZ fixes its run with screw clips, where LITSOUL relies on adhesive. LITSOUL adds 100ft of reach, lensed optics and a separate tunable white.

How the roofline options line up:

LightLengthWeather ratingColour style
LITSOUL permanent eave lights400ftIP65RGB plus 2700K–6500K white
FBZ permanent outdoor lights300ftIP65RGB
AILBTON IP68 outdoor strip100ftIP68RGB
Cedarine RGB+IC outdoor strip53ft, links to 530ftIP67Multi-colour chase

Pick FBZ's 300ft run if screws suit your fascia better than tape. The AILBTON 100ft strip fits decks, rails and pool edges, and the Cedarine RGB+IC strip is the one for chasing rainbows along the gutter.

LITSOUL makes the most sense for a house that wants one install to cover every season, with a white good enough for daily use and enough length to go all the way round. A long, simple roofline with a smooth soffit is the ideal canvas. If the house has short, broken runs over bay windows and porches, two or three shorter strips placed where they matter can look tidier than one very long cable stretched between them.

Before buying, check:

  • The total roofline length, so 400ft is not mostly left in the box.
  • An outdoor outlet within reach of the planned power point.
  • A smooth mounting surface for the adhesive.
  • Whether chasing multi-colour effects matter, which points to an RGB+IC strip.
Glow questions

Hook-up questions

Can LITSOUL eave lights stay up all year?

Yes, that is the idea. The run is rated IP65 with UV resistance and an internal sealing strip, and LITSOUL quotes an operating range from -22°F to 140°F.

Do LITSOUL lights have a plain white mode?

Yes. Alongside RGB colour, the white tone adjusts from 2700K warm to 6500K cool for everyday lighting.

Which app runs the LITSOUL permanent lights?

Lotus Lantern, on iPhone and Android. A remote comes in the box as well, and the app adds the 29 scenes, music sync and the timer.

What gap should LITSOUL lights keep from the wall?

LITSOUL suggests 2 to 4 inches out from the wall, so each lens can spread its cone of light before it reaches the siding.