Six acrylic bars with smart-IC LEDs behind them, so colour can chase, bounce and flash along the dash and doors, or sit still in one shade for a calm night drive.
MAODANER's kit puts smart-IC LEDs behind strips of clear acrylic, and that pairing changes how a cabin glows at night. A single-colour strip lights the whole bar in one tone; here the IC chips let different sections show different colours, so light runs, bounces and dances along the dash. When the moment calls for calm, the same bars hold one steady colour.
The acrylic matters as much as the chips. Each bar spreads its LEDs into a smooth, even line, softer than a bare strip and brighter than a fibre-optic tube that is lit from one end by a single LED. 593 LEDs sit behind 175 inches of bar in the six-piece set, so the line stays bright right to the end of a door panel.
The six bars in the lead kit:
A main controller runs the show and four sub controllers pass the signal out to the doors, so every bar stays in step when a chase mode sweeps around the cabin. The Magic Lantern app on iPhone or Android sets colours, speed, brightness, custom modes and the sound reaction.
There is no remote in this kit. Instead, a hidden touch button does the basics: a single tap steps through colours, and a one-to-two-second hold switches the whole set on or off. That covers the drive home when the phone is in a pocket.
Pairing is done in the app, with the phone's Bluetooth menu left closed, the same rule as with the ELK-BLEDOM controllers used by strips and rope lights.
| Spec | Value |
|---|---|
| Pieces (lead kit) | 6 acrylic light bars |
| Bar lengths | 4 × 29.5in, 1 × 43.3in, 1 × 14in |
| Total bar length | 175 inches |
| LED count | 593 |
| Light type | RGB with smart IC (Dreamcolor) |
| Colours | 16 million |
| Effects | Chase, bounce, dance, flash, static colour |
| Controllers | 1 main controller, 4 sub controllers |
| App | Magic Lantern (iOS and Android) |
| Connectivity | Bluetooth |
| On-board control | Hidden touch button: tap for colour, hold 1–2s for on/off |
| Sound reaction | Built-in sound sensor |
| Voltage | 12V |
| Material | Acrylic light guides |
| Cuttable | Yes, each bar can be shortened |
| Vehicle fit | Universal: passenger cars, SUVs, trucks |
| In the box | 6 light bars, controllers, pry tool |
| Bigger kits | 18-in-1 adds 4 footwell and 8 door lights; 22-in-1 adds 4 door speaker lights |
Fitting is mostly a job for the pry tool that ships in the box. Acrylic bars of this type push into the seams where dashboard and door panels meet, so the light line looks built in rather than stuck on. The kit is universal, sold for passenger cars, SUVs and trucks, and every bar can be cut shorter when a panel is smaller than the piece.
Cables are the part that decides whether the result looks factory or homemade. Hide them under carpet edges and behind panels, away from seat rails that move. At doors, leave a loop so opening and closing does not tug the connectors.
The set runs on 12V, the standard cabin supply. Before wiring into anything beyond a plug-in socket, check how your car handles power when the ignition is off, since a light left on overnight can flatten a small battery.
Night driving deserves one rule of its own. Keep the brightness low and the effects still while moving, and save chase and flash modes for when the car is parked; bright moving light in the corner of the eye pulls attention off the road.
MAODANER sells the same acrylic core in three sizes, and each step adds lights lower down and further into the doors. All three share the 593-LED, 175-inch acrylic set and the Magic Lantern app. The difference is how much of the cabin joins the show.
| Kit | What it adds | Best for |
|---|---|---|
| 6-in-1 | 4 × 29.5in, 1 × 43.3in, 1 × 14in acrylic bars | A clean line across dash and doors |
| 18-in-1 | 4 footwell lamps (2 × 44.5in, 2 × 64.2in), 4 door-handle lights, 4 door-pocket lights | Glow at knee and floor level |
| 22-in-1 | All of the above plus 4 door speaker lights (5.9in with 19in leads) | A full cabin wrap |
The six-piece kit is the one to start with in a smaller car or when you simply want the dash and doors outlined. It keeps installation to an afternoon and leaves the footwells dark, which some drivers prefer at night.
The 18-piece kit brings in the floor. Footwell lamps wash the carpet in colour, and the door-handle and door-pocket lights make each handle easy to find in the dark. Passengers notice these first, since they sit where hands and feet go.
The 22-piece kit rings the door speakers as well. It suits a car where the speakers are a feature, and it makes the music mode more convincing because the light seems to come from the sound itself.
The controller carries a sound sensor, so the bars can follow the stereo, a phone speaker, or voices in the cabin. Colours shift with the rhythm and the effects keep time. Parked with the doors open and a playlist running, the whole interior becomes part of the party.
Moods worth saving as favourites in the app:
Other cabin kits trade features differently. Jushope's acrylic set also chases colour but adds an RF remote, which some drivers find quicker than any app. WEBUPAR's 14-in-1 pairs the same bar layout with under-dash and door-pocket lights from the start. Jushope's fibre-optic kit is the simpler RGB route for a lower-key glow.
Before buying, check these:
For more on running light kits from a phone, the app comparison of Lotus Lantern, duoCo and Lotus Lamp X shows how music modes and timers differ. The full ELK-BLEDOM light range also carries underglow and rock lights for the outside of the car.
The kit uses the Magic Lantern app on iOS and Android. A hidden touch button handles colour changes and on/off without the phone.
Yes, each bar in the six-piece set can be cut to fit a smaller panel. Mark the length first and cut between LEDs.
It keeps the six acrylic bars and adds four footwell lamps, four door-handle lights, four door-pocket lights and four door speaker lights.
Yes. A built-in sound sensor lets the colours change with the stereo or voices in the car.
