A full-cabin light show in one box: acrylic bars for the dash, console and all four doors, plus four footwell lamps, all glowing in sync and dancing to whatever the stereo plays.
Most car light kits light the front of the cabin and stop there. The STARINBOX 10-in-1 goes further: a long bar for the dash, a short one for the centre console, four bars for the doors and four lamps pointing into the footwells. With 600 LEDs spread across roughly 175 inches of acrylic, the whole interior wraps in one continuous colour when the doors close.
The bars are 11.7mm acrylic. LEDs sit along the full length and the acrylic diffuses them into one even band, so the glow reads as a solid line instead of a string of dots. That design is why acrylic kits look brighter than fibre optic ones, which feed light only from the ends of a thin strand.
Here is how the ten pieces map to the car:
The effect is a lounge on wheels: a warm amber for a late drive home, icy blue for a city cruise, or a slow colour fade when friends pile in for a road trip. Power-off memory brings back the last scene on every start.
| Spec | Value |
|---|---|
| Kit type | 10-in-1 acrylic interior ambient kit |
| Acrylic bars | 6: 4 × 29.5in, 1 × 43.3in, 1 × 14in |
| Total bar length | About 175 inches |
| Footwell lamps | 4, on 44.5in (×2) and 64.9in (×2) leads |
| LEDs | 600 |
| Bar profile | 11.7mm thin acrylic, flexible, cuttable |
| Colour | RGB, 16 million colours |
| Controllers | 5 control boxes: 1 main, 4 sub-controllers |
| Extra control | Hidden touch button (tap to change mode, hold 1–2s for on/off) |
| App | Magic Lantern (Bluetooth), iOS and Android |
| Music | Built-in microphone, sound-reactive |
| Voltage | 12V DC |
| Power connection | Vehicle ACC lines: centre console for the main box, door 12V lines for sub-boxes |
| Protection | Short-circuit protection, power-off memory |
| Operating temperature | −20 to 60°C |
| Fit | Universal, cars and trucks |
| In the box | 6 bars, 4 footwell lamps, 5 control boxes, touch button, pry tool, adhesive tape, extension cord |
| Warranty | 2 years |
The big difference between this kit and plug-in rivals is power. There is no cigarette-lighter plug doing all the work. The main controller connects to the centre console's ACC line, and each of the four sub-controllers connects to a 12V ACC line inside its own door, such as the feed for the window motor or door lock.
That design keeps door wiring short and avoids pushing cables through the door hinge, but it asks for real installation work. The maker's order goes like this:
The main controller leads the sub-controllers, so all ten pieces stay in step. The maker notes that sync only works when the main box sits on the console power and each sub-box has power inside its door.
The acrylic bars bend gently and can be cut to fit shorter trims. Avoid folding them sharply, since a crack stops light passing along the bar.
Phone control comes from Magic Lantern for iOS and Android. The main controller carries a QR sticker that links to the download; after that, Bluetooth on and the app does the finding, with no pairing in phone settings. On Android, location services and the app's permissions need to be on, or the controller never appears.
Magic Lantern behaves much like Lotus Lantern and duoCo Strip, which run the ELK-BLEDOM controllers so many phones mistake for speakers. The routine is the same: the light is found by the app, not paired as audio. If the connection fights you, the pairing troubleshooting steps apply here too.
Once connected, the cabin has several moods on tap:
The hidden touch button is the no-phone backup. A tap steps through the colour modes and a 1–2 second press switches the whole kit on or off, which is handy when a passenger finds the glow too much on the motorway.
For more on music sensitivity and saving favourite scenes, the ELK-BLEDOM app guide covers the shared controls.
Sound mode listens through the main controller, which usually sits near the centre console. That is a good spot, since it is close to the dash speakers and far from road noise at the doors. If the lights barely react, raise the mic sensitivity in the app before turning the stereo up.
The STARINBOX sits at the complete end of the car-light range: more pieces, more LEDs and more installation than most kits. Before ordering, decide whether you want the whole cabin lit or just the front, and whether you are happy opening doors.
| Kit | Pieces | Power | Best for |
|---|---|---|---|
| STARINBOX 10-in-1 | 6 bars + 4 footwell lamps | ACC wiring, 5 controllers | Full four-door cabin |
| Jushope acrylic 10-in-1 | Acrylic bars | Cigarette plug or wires | Plug-and-play, colour chasing |
| SAMGCHI dreamcolor 6-in-1 | 6 acrylic bars | Cigarette plug or wires | Front cabin, chasing |
The Jushope acrylic lights are the easiest-fitting alternative, with a plug option and dreamcolor chasing. The SAMGCHI 6-in-1 kit suits smaller cabins where six bars cover the dash and front doors.
A short checklist before the STARINBOX goes in the basket:
Pick the STARINBOX when the goal is a showpiece cabin that glows from the floor to the door pockets, and the wiring is part of the fun. Pick a plug-in kit when you want colour tonight and the option to remove it without a trace.
The two-year warranty doubles the one year that SAMGCHI and YM E-Bright give their car kits, a fair trade for the extra work of fitting it. Simpler cabin kits and underglow sets are gathered on the ELK-BLEDOM front page.
No. The main controller wires to the centre console ACC line and each sub-controller to a 12V ACC line in its door, so it is a hard-wired install.
Yes. The main controller leads the four sub-controllers, so the whole kit follows one scene when every controller has power.
Magic Lantern, on iPhone and Android. Connect within the app; on Android, allow location access or the lights will not appear.
Yes, the bars can be cut for shorter trims. Bend them gently and never fold them, or the light stops travelling along the bar.