- Runs on the duoCo StripX app
- Pulses to music from its own mic
- Several colours at once, chasing effects
Two small bars that turn sound into a bouncing colour spectrum, like the level meter on a studio desk, running from a built-in battery or USB-C on a desk, a dash or a DJ table.
The HUEMIHUI bars look like the level meters on a mixing desk, and they behave like them. Play a song and each bar jumps with the sound, colour climbing and falling with the volume, so bass drops leap to the top and quiet verses barely flicker. Put one either side of a speaker or a TV and the music suddenly has a picture.
Each bar carries 32 SMD 5050 RGB LEDs and a high-sensitivity microphone. A 32-bit ARM chip reads the sound, and HUEMIHUI quotes a response of up to 0.08 seconds, fast enough for the spectrum to feel locked to the beat. The bars need no connection to the speaker; they simply listen.
Moods they suit best:
The eight rhythm patterns on the bar itself cover the classic meter styles. The app adds a much wider library when you want static colours or slow effects instead of a spectrum.
Placement changes the show. Closer to the speaker, the bars catch every kick drum and swing hard; a little further away, they settle into a gentler sway. Try a few spots before sticking anything down.
| Spec | Value |
|---|---|
| Set | 2 rhythm light bars |
| LEDs | 32 SMD 5050 RGB beads per bar |
| Processor | 32-bit ARM chip for sound pickup |
| Response | Up to 0.08s (maker figure) |
| On-bar patterns | 8 pickup rhythm + 21 dynamic, set with 3 keys |
| App | duoCo StripX (Bluetooth), iOS and Android |
| App modes | 213 dynamic, 16 million static colours, DIY |
| App extras | Brightness, colour temperature, speed, timer, mic sensitivity |
| Microphone | Built-in, high sensitivity |
| Input | DC 5V/1A, Type-C |
| Battery | Built-in, about 3 hours per full charge |
| Cable | 1 USB cable with 2 Type-C plugs (powers both bars) |
| Mounting | 8 double-sided stickers; stands vertical or horizontal |
| Shell | Black |
| Package size | 10.63 × 2.76 × 1.18 inches |
| Weight | 3.2oz |
| Water resistance | Not waterproof; avoid humidity over 90% |
| In the box | 2 light bars, 1 dual Type-C USB cable, 8 stickers, manual |
Most music-reactive lights need a cable to the wall. The HUEMIHUI bars carry a built-in battery, so a full charge gives about three hours of light with nothing plugged in. That is enough for a dinner party, a gaming session or an evening on the balcony.
When the battery runs down, or for all-day use, the bars run from 5V USB through a Type-C port. The included cable is a single USB lead that splits into two Type-C plugs, so one USB port powers both bars at once. It is one shared cable, not two separate ones, which is worth knowing if you plan to put the bars far apart.
Power tips worth keeping:
The eight double-sided stickers let the bars sit fixed on a dash, a shelf edge or the back of a monitor stand. On a desk they can just stand on their own. In a car, stick them where they will not slide under braking and where they stay out of the driver's line of sight.
They run cool on 5V, but the maker still rates them as unsuitable for children aged six and under.
The three keys on the back of each bar switch between the eight rhythm patterns and 21 dynamic ones, no phone needed. For everything else there is duoCo StripX, from the same circle of apps as Lotus Lantern, which runs ELK-BLEDOM controllers.
That ELK-BLEDOM label on a phone's Bluetooth scan sends many owners hunting for a speaker. These bars only listen, and the link is made by the app itself. Download duoCo StripX, switch Bluetooth on, and the bars join automatically. The pairing steps sort out any that hide.
The app opens up a far bigger palette:
Music mode can also play songs stored on the phone. On Android the app finds local music automatically; on iPhone, the songs need to be in the phone's own music library, synced from a computer, since streaming apps are not picked up.
For more on the shared controls and how duoCo StripX compares with Lotus Lantern, the ELK-BLEDOM app guide has the details.
A handy routine: leave the bars in rhythm mode for music, then use the app's timer and a warm, dim colour so they double as a night-light before bed.
Rhythm bars are the smallest music-reactive pieces of the ELK-BLEDOM range. They light a spot, not a room, and their charm is the level-meter bounce. If the goal is a room-filling glow, a lamp or strip does more.
| Light | Look | Power | Best for |
|---|---|---|---|
| HUEMIHUI rhythm bars | Bouncing level meter | Battery or USB-C | Desks, dashboards, DJ tables |
| DTQJ spiral desk lamp | Glowing spiral | USB | Desks and nightstands |
| Daymeet smart firework light | 11 strips in a firework burst | Corded | Bedroom walls and ceilings |
The DTQJ spiral RGB desk lamp shares the duoCo StripX app and USB power, with a sculptural shape that works as decor even when switched off. The Daymeet smart firework light sticks eleven strips to the wall in the shape of a bursting firework, with 213 modes on the same app.
Before choosing the HUEMIHUI pair, check these:
Add a backlight behind the monitor and the whole setup moves with the music. The bars bring the bounce; the strip fills the wall. Build the rest of the setup from the full ELK-BLEDOM collection.
About three hours on a full charge. For longer sessions, run the bars from 5V USB through the Type-C port.
No. Each bar has its own microphone and reacts to whatever sound it hears nearby.
Yes. Three keys on the back switch between 8 rhythm patterns and 21 dynamic ones. The duoCo StripX app adds 213 modes, colours and timers.
Once the power drops out or a timer switches them off, the bars must be restarted with their own switch; then the app reconnects.