The words Let's Party written in RGB LED neon tube on a clear acrylic board, ready to flash, fade and pulse with the music above a cake table, a home bar or a dance floor.
Some decorations whisper; the JXIN sign announces. Two words, Let's Party, traced in flexible LED neon tube and fixed to a clear acrylic board 23 inches wide and 10 inches tall. Switch it on and the room knows what kind of night it is.
Classic glass neon glows in one colour forever. This sign uses RGB LED tube instead, so the same letters can be hot pink for a birthday, gold for a wedding and electric blue for a game night. JXIN stores 204 colour modes, from a single steady shade to multicolour sweeps and blinking at different speeds.
The clear acrylic backing almost disappears once the lights go down, so the words seem to float on the wall. By day the sign is still a tidy, readable piece of decor, which matters for a bar corner or a teenager's room where it stays up after the party is over.
It also dims. Turn the brightness low and Let's Party becomes a playful night light in a game room or a soft glow over a home bar on a quiet evening. LED neon tube runs far cooler than glass neon and needs no high-voltage transformer, so the sign is comfortable to handle and simple to take down and reuse at the next celebration.
| Spec | Value |
|---|---|
| Text | Let's Party |
| Size | 23 x 10in |
| Materials | Clear acrylic board with RGB LED neon tube |
| Colour modes | 204 |
| Colour effects | Single-colour and multicolour changes, blinking at set speeds |
| App | duoCo StripX (iOS and Android) |
| Connection | Bluetooth |
| Controls | App, remote and 3-key dimmer box |
| Sound reaction | Music sync mode and sound-activated mode |
| Timer | Yes, scheduled on and off |
| Dimmable | Yes |
| Power | 12V DC adapter (included) |
| Mounting | Wall, window or door, or free-standing on a flat surface |
| In the box | Sign, 12V adapter, remote, 3-key control box, fixing accessories |
| Part number | C-002 |
Every party has a spot where people gather for photos, and the JXIN sign turns that spot into a set. Hang it above the cake, behind the bar or at the head of the dance floor and it frames every picture with a glowing caption.
Where Let's Party shines:
Once the music starts, tap music sync in duoCo StripX and the letters change colour with the playlist. The sound-activated mode listens to the room itself, so cheers, singing and bass all feed into the show. The timer can bring the sign on before guests arrive and switch it off once the last of them have gone.
A few honest limits. The wording is fixed, so a sign that says something personal needs another product. It runs on a 12V adapter from a wall socket, which ties it to a spot near an outlet or an extension lead. And it is a decorative light for indoor walls and windows, not a sign for a rainy patio.
The JXIN sign is light and arrives with its fixings, so it goes up in a few minutes. It can hang on a wall, sit in a window, mount on a door or simply stand on a table or shelf against the wall. Pick the spot first by where the plug can reach.
A tidy setup:
There are three ways to drive it. The remote handles colour and brightness from across the room, the 3-key dimmer box on the cable gives quick on, off and mode changes, and the app unlocks the full list of modes, music sync and the timer. Hand the remote to the birthday guest and let them pick the colour.
The sign's controller belongs to the ELK-BLEDOM Bluetooth type, so the handshake happens in duoCo StripX, never on the phone's settings screen. The pairing walkthrough covers a controller the app cannot find, and the duoCo StripX guide explains music, mic and timer settings.
A window spot has a bonus: the sign reads from the street as guests arrive, like the front of a bar. Mind which way it faces, though: through clear acrylic the letters read the right way round from one side only, so decide whether the room or the street gets the proper view.
The JXIN sign does one job brilliantly: a ready-made glowing headline for a celebration. Other ELK-BLEDOM lights set the mood in different ways, and the right pick depends on whether you want words, shapes or a whole wall of movement.
| Light | What it shows | App | Power |
|---|---|---|---|
| JXIN Let's Party sign | Fixed words, 23 x 10in | duoCo StripX | 12V adapter |
| SILFU neon rope, 50ft | Any shape you bend | Lotus Lantern | 24V adapter |
| DTQJ smart firework | A bursting firework | duoCo StripX | 5V USB |
| ZOKON 3D cloud | A lightning cloud | duoCo StripX | USB |
Want to write your own word or outline a doorway? The SILFU neon rope bends into any shape and runs 50ft. For a moving centrepiece instead of text, the DTQJ firework bursts across the wall, and the ZOKON cloud storms from the ceiling.
The sign suits the host more than the tinkerer. There is nothing to cut, shape or glue: it comes finished, with its adapter, remote and fixings, and looks the same on the tenth party as on the first. If the plan is a one-off wedding with a specific monogram, a custom sign or a rope you bend yourself makes more sense. If the plan is a house where the music comes on every other weekend, a ready-made Let's Party that changes colour on command is hard to beat for a quick, bright welcome.
Before buying the JXIN sign, check:
The sign measures 23 inches wide by 10 inches tall on a clear acrylic board.
Yes. duoCo StripX has a music sync mode, and a sound-activated mode lets the sign change colour with the noise in the room.
A 12V DC adapter comes in the box and plugs into a wall socket. A 3-key dimmer box sits on the cable for quick control.
Yes. It can hang on a wall, window or door, or stand on a table or any flat surface.