Top lights
LED strip · 6 × 12in · duoCo StripX · USB adapter

WUYXPG Under-Cabinet Light Kit

Six short colour strips, already wired together at the factory, that stick under kitchen cabinets or shelves and turn the counter into a stage for cooking and parties alike.

  • Strips6 × 12in (72in in total)
  • Links2.6ft connecting wires, pre-wired
  • AppduoCo StripX over Bluetooth
  • Remote2.4G wireless music remote
  • Power5V USB plug adapter, 12W
  • MountingAdhesive tape, no tools
Lights up
  • Kitchen cabinets that need light on the worktop and colour for parties
  • Bookshelves, display cases and closets with several short shelves
  • Renters who want no screws and no wiring
Pass on it for
  • One long continuous run: the kit is six separate bars
  • Wet spots over a sink splash zone: it is not water resistant
  • Hard-wired lighting on a wall switch: it plugs into a socket
See the glow

A kitchen counter glowing under six 12in bars

Under-cabinet light is the most useful glow in the house. It lands on the worktop where knives and chopping boards live, fills the shadow the cabinets cast, and turns the kitchen into a soft-lit room at night. The WUYXPG kit does it with six 12in strips, already wired together, that stick to the underside of cabinets or shelves.

Short bars suit kitchens better than one long reel. Wall cabinets are rarely one continuous run: there is a cooker hood, a corner, a gap for the fridge. Six separate 12in strips, joined by 2.6ft connecting wires, can hop across those gaps and sit centred under each door.

  • Six strips of 12in, 72in of light in total.
  • 2.6ft connecting wire, long enough to skip a hood or a window.
  • Pre-wired at the factory, so the kit works straight out of the box.
  • USB-powered through the included plug adapter, rated 12W.

For cooking, set a bright, cool colour near white so the worktop is clear and even. After dinner, drop the brightness and slide to amber or rose, and the cabinets become a mood light for the evening. On party nights, the music mode turns the whole run into a light show above the snacks.

The same kit suits bookshelves, display cases, wardrobes and desk hutches. Any spot with several short shelves in a row benefits from separate bars more than from a strip bent round every corner.

A wardrobe gains a lot from them too. Stuck under each shelf, the bars light folded clothes from above, and a cool white-ish tone makes navy and black easy to tell apart on a dark morning.

Light specs

Every wire and watt

SpecValue
Strips6
Strip length12in each, 72in in total
Strip size12 × 0.5 × 0.1in
Connecting wire2.6ft between strips
WiringPre-connected at the factory; strips are directional
ColoursMillions, colour changing
BrightnessAdjustable in the app and on the remote
AppduoCo StripX (Bluetooth, no phone pairing needed)
Remote2.4G wireless music remote, 360°
Sound reactionBuilt-in microphone, adjustable sensitivity
TimerYes
Power5V USB port adapter, included
Rated power12W
CertificationETL
InstallationSurface mount with adhesive tape, no tools
Water resistanceNot water resistant, indoor use
In the box6 × 12in strips, power adapter, 2.4G music remote, manual

Party colours on a 2.4G music remote

The kit arrives with a wireless 2.4G music remote that works in every direction, so it does not need to point at anything. That makes it the easy choice in a kitchen, where the controller is hidden behind a cabinet lip and the person holding the remote is at the table. It switches colours, brightness and the music mode from anywhere in the room.

  • Cooking: bright, near-white light on the counter.
  • Dinner: a warm low glow under the cabinets.
  • Party: music mode with the sensitivity turned up.
  • Night: a dim colour on a timer as a gentle kitchen night light.

The duoCo StripX app goes further. It offers millions of colours, brightness control, a timer and a mic mode, its sensitivity on a slider, that tracks the beat of whatever is playing. Setup is hands-off: with the phone's Bluetooth on, duoCo StripX locates the bars by itself in 5 to 10 seconds.

No Bluetooth pairing needed. WUYXPG says so plainly: skip the phone's Bluetooth settings and let duoCo StripX find the light. If a device named ELK-BLEDOM or similar appears in a scan, that is the light controller, not a speaker. Still nothing? Unplug the kit for a moment and relaunch the app, or reboot the phone as a last step. The pairing fixes cover more.

Timers make the kit part of the daily routine. Schedule the counter to glow at breakfast, again as evening falls, and go dark once the house is asleep, all without a remote in hand.

Among its siblings

Where it glows in the lineup

ELK-BLEDOM light models by kind, September 2026. Highlighted: WUYXPG Under-Cabinet Light Kit.

Sticking the pre-wired strips under wall cabinets

Installation needs no tools and no electrician. The strips come already connected, backed with strong adhesive tape, and the power adapter plugs into an ordinary socket. The work is in the planning: where the adapter sits, where each bar lands and how the wires tuck away.

  1. Clean the underside of each cabinet with a dry cloth; grease from cooking is the main reason tape fails.
  2. Line the bars up on the worktop in their factory order, checking that the chain reaches from the socket to the last cabinet.
  3. Stick the first bar nearest the socket, then work outward, placing each strip toward the front edge so the light falls on the worktop, not the wall.
  4. Clip or tape the connecting wires along the cabinet underside.
  5. Plug in, connect the app and test every strip before pressing each one firmly.

Each strip is directional, and the chain arrives in the right order. Unplug a bar to thread a wire and it needs to rejoin facing its original direction, or every bar after it stays dark. The manual inside the box shows the arrows.

Where the socket sits decides the layout. A socket above the worktop lets the adapter hide on top of a wall cabinet, with the first strip just below. A socket at floor level means running the lead up the side of a tall unit, which a few adhesive cable clips keep neat.

  • Mount strips toward the front edge for light on the counter.
  • Keep them clear of the hob and steam from the kettle.
  • Check the socket is within reach of the first strip.

With no water resistance, the bars belong away from the splash zone right above a sink tap. A cabinet a little to the side of the sink is fine; the tape and electronics just should not be sprayed.

Other moods

Three more ways to glow

Same maker, different pieces1 WUYXPG 6 Pre-Cut Strip Light Kit
WUYXPG 6 Pre-Cut Strip Light Kit
WUYXPG's 6 pre-cut strip kit comes with its own adapter, remote and duoCo StripX control, often used on the back of a TV.
  • Runs on the duoCo StripX app
  • Pulses to music from its own mic
  • Remote included
See the glow
One long chasing run3 HOUHUI RGBIC Chasing Strip Lights
HOUHUI RGBIC Chasing Strip Lights
HOUHUI's 32.8ft RGBIC strip sends several colours along a single reel for long walls and ceilings.
  • Runs on the duoCo StripX app
  • 32.8ft
  • Pulses to music from its own mic
See the glow

WUYXPG's cabinet bars versus long strips and sensor lights

Six short bars fill a gap between one long strip and a single puck light. They light a run of cabinets evenly, jump across hoods and windows, and add a party mode that plain kitchen lighting lacks. A long reel does a cleaner job along one uninterrupted shelf, and a motion-sensor strip suits a hallway or bed frame better.

LightShapeBest spot
WUYXPG under-cabinet kit6 × 12in bars, pre-wiredKitchen cabinets, shelves, closets
WUYXPG 6 pre-cut strip kit6 pre-cut stripsTV backs and shelves
HOUHUI RGBIC strip, 32.8ftOne long chasing reelLong walls and ceilings
Meiyue motion-sensor strips2 × 9.84ft with sensorUnder beds, stairs, cabinets

Settle these before ordering:

  • Cabinet count: six bars cover six doors or shelves; measure the run.
  • Socket: one nearby outlet for the USB adapter.
  • Effects: WUYXPG describes colour changing and music sync; for rainbows racing along a run, a dedicated RGBIC strip is the surer pick.
  • Control: app, remote, or both; the kit offers both.

For the friend who always hosts, it adds working light and party colour to the kitchen in one go. Scenes and timers get a fuller walk-through in the duoCo StripX notes, and the homepage lines up every other glow.

The kit also answers a common problem in rented flats: dark kitchens with no budget for an electrician. Nothing is drilled, nothing is wired into the walls, and everything comes down again with the adhesive when the lease ends. For a tenant who cooks and hosts, that puts it among the easiest glows in the family to live with.

Glow questions

Hook-up questions

How long is the WUYXPG under-cabinet kit?

Six 12in strips, 72in of light in total, joined by 2.6ft connecting wires.

Does the WUYXPG kit need pairing in Bluetooth settings?

No. Install duoCo StripX, turn on Bluetooth and open the app; it connects on its own in 5 to 10 seconds.

What powers the kit?

An included plug adapter with a 5V USB port. The kit is rated at 12W.

Can the strips be rearranged?

Yes, but each strip is directional, so reconnect them the same way round or the chain after it stays dark.