Top lights
Car underglow · 4 strips · 252 LEDs · 12V

Xprite Underglow Car Lights, 4 Pieces

Four flexible strips in rubber tubing that stick under the sills, bumpers and sides, then flood the ground with colour that can pulse to whatever is playing.

  • Pieces4 underbody strips
  • LEDs252 SMD 5050 RGB
  • AppLotus Lantern
  • Remote8 colours, 4 effects, 4 sound modes
  • WeatherWaterproof rubber tubing
  • Power12V: lighter plug or direct wiring
Lights up
  • Show cars, meets and parked light shows
  • Owners who want app and remote control side by side
  • Trucks, SUVs and vans as well as cars
Pass on it for
  • Lighting the cabin: an acrylic interior kit belongs inside
  • Wheel-well spots: rock light pods aim better there
  • Places where local law bans underbody light on the road
See the glow

A pool of colour under the Xprite-lit car

Underglow is the light you see without seeing the source. Xprite's four strips sit tucked under the body, and what shows is a band of colour on the tarmac that makes the car look like it is hovering. With 252 RGB LEDs across the set, there is enough output to colour concrete, grass or a wet car park, and the colour can shift, breathe or strobe on command.

Each strip carries SMD 5050 chips, the three-in-one RGB type where red, green and blue share a single package. That gives even mixing, so a purple looks purple rather than red and blue dots side by side. The LEDs live inside flexible rubber tubing that keeps road grit off and handles both hot tarmac and cold winter nights.

Three ways to run the show:

  • Lotus Lantern app: a 16-million-colour wheel, 30+ strobe patterns, music play-along from your phone's library, and a mode that uses the phone's own microphone.
  • Remote: 8 preset colours, 4 lighting effects and 4 sound-active modes for quick changes at a meet.
  • Control box: a high-sensitivity mic of its own, so sound modes work with no phone at all.

Lotus Lantern is the same app family that drives many ELK-BLEDOM strips indoors. In a phone's Bluetooth list the underglow controller may appear under a generic controller name instead of Xprite; that is normal, and the connection is started in Lotus Lantern itself. The pairing walkthrough for Lotus Lantern controllers covers the steps on iPhone and Android.

The glow suits parked moments best: shows, meets, a driveway at night. Moving, it attracts attention of a less welcome kind, and the rules for that are local.

Light specs

Every wire and watt

SpecValue
ModelUGL-62709-G3
Pieces4 underbody strips
LED count252 in total
LED chipsSMD 5050, 3-in-1 RGB
Colours16 million in the app, 8 presets on the remote
AppLotus Lantern
App effects30+ strobe patterns, music play-along, mic mode
Remote modes8 static colours, 4 lighting effects, 4 sound-active modes
ConnectivityBluetooth and RF
Sound reactionHigh-sensitivity mic in the control box
HousingFlexible PVC rubber tubing
Weather ratingWaterproof, heat and cold resistant
Voltage12V
Power options12V cigarette-lighter adapter or positive/negative wiring
MountingPre-applied adhesive tape
In the box4 strips, control box, remote, fuse holder, quick-connect plugs, lighter adapter
Vehicle fitCars, SUVs, vans, pickups, trucks
Warranty1 year
Optional add-on2m extension cable

Wiring the Xprite fuse holder before the first glow

Xprite gives two ways to feed the strips: the 12V cigarette-lighter adapter for a quick test, or positive and negative wires to a permanent 12V source. Whichever route you take, the included fuse holder goes in the line. The maker flags it as essential, since it protects both the car and the lights if a wire chafes through.

  1. Park on level ground and let the underside cool before touching anything.
  2. Test all four strips on the lighter adapter first, laid out on the ground.
  3. Clean each mounting surface with a degreaser; road film stops tape from holding.
  4. Stick the strips under the side sills and behind the bumpers, facing down.
  5. Link them with the quick-connect plugs and route cables away from exhaust, suspension and steering parts.
  6. Fit the fuse holder close to the power source, then connect the control box.
Tape is the start, not the finish. The pre-applied adhesive locates each strip, but water, heat and vibration test it hard. Many installers back it up with cable ties or clips every foot or so, which costs little and keeps a strip from dragging on the road.

Placement shapes the look. Strips along the sills give a long, even band on each side; strips at the bumpers fill the front and rear. Keep each strip a little inboard so the glow spills out rather than the tube showing from the kerb.

If the control box ends up far from the power source, a 2m extension cable is an optional add-on. Plan the cable path on paper first, especially on trucks and vans, where the distance from front bumper to rear can outrun the stock leads.

A direct-wired set can stay on with the engine off. Use the app timer or a switched circuit so the lights do not drain the battery overnight.

Among its siblings

Where it glows in the lineup

ELK-BLEDOM light models by kind, September 2026. Highlighted: Xprite Underglow Car Lights, 4 Pieces.

Car meets and slow cruises with the Xprite sound modes

Sound-active modes are where underglow turns into a party trick. The control box mic picks up the stereo through open windows or a speaker on the tailgate, and the colour under the car starts moving to the beat. The remote's four sound modes give quick variety; the app's music mode goes further by following songs straight from the phone.

Scenes that make good presets:

  • Show stand: one deep colour that matches the paint, brightness high, effects off.
  • Night meet: slow breathing between two colours, so photos catch a steady glow.
  • Tailgate party: sound-active mode at full sensitivity, doors open, playlist up.
  • Garage or driveway: soft white-ish tone as a work light under the sills.

Road rules deserve a straight word. Laws on underbody lighting differ between states and countries, and many forbid red or blue light, flashing effects, or any underglow while driving. Treat the strobes and sound modes as parked features, and check your local rules before switching anything on in traffic.

The same kit also works off the car. Xprite lists house, garden and party decoration as uses, and a set of waterproof strips powered from a 12V source can edge a boat deck, a trailer or a garden bar just as well.

For photographs, dusk beats full dark. A little ambient light shows the car's shape while the glow stays strong on the ground. A wet surface doubles the effect by reflecting the colour back up at the body.

Other moods

Three more ways to glow

Lifted trucks and off-road1 Xprite Bluetooth Rock Lights, 6 Pods
Xprite Bluetooth Rock Lights, 6 Pods
Xprite's six rock light pods carry 18 LEDs each in IP67 housings for wheel wells and undercarriage.
  • Runs on the Lotus Lantern app
  • Pulses to music from its own mic
  • IP67 weatherproof
See the glow
Colour inside the cabin2 QAUBEN Car Footwell Lighting Kit
QAUBEN Car Footwell Lighting Kit
QAUBEN's footwell kit lights the floor under the dash with sound-reactive RGB on Lotus Lantern.
  • Runs on the Lotus Lantern app
  • Pulses to music from its own mic
See the glow
Chasing light on the dash3 Jushope Acrylic Car Interior Lights
Jushope Acrylic Car Interior Lights
Jushope's acrylic interior bars run multi-colour chase effects with an app and RF remote.
  • Runs on the Magic Lantern app
  • Pulses to music from its own mic
  • Several colours at once, chasing effects
See the glow

Xprite underglow beside rock pods and cabin kits

Underglow washes the ground in a broad band. Rock lights do something different: small, tough pods aimed into wheel wells and at the terrain, favoured on off-road trucks. Cabin kits turn the light inward. The pick depends on where you want people to look.

KitWhere it glowsFormControl
Xprite underglowGround around the body4 strips in rubber tubingLotus Lantern app, remote
Xprite rock lightsWheel wells, undercarriage6 pods, 18 LEDs each, IP67Lotus Lantern app, remote
QAUBEN footwell kitCabin floorTwo interior lamps, 12VLotus Lantern app

Choose the Xprite underglow for the classic show-car halo on a car, SUV or van with a flat enough underside. Pick Xprite's six rock pods for a lifted truck or UTV, where strips would sit too high to paint the ground and too exposed to trail damage.

The two Xprite kits also stack. Both answer to Lotus Lantern, so strips along the sills and pods in the wheel wells can share a colour scheme, each on its own controller. A low car gets the band of light on the ground; the pods add bright points of colour at each corner where the tyres meet the road.

Settle these first:

  • Enough flat mounting surface under the sills and bumpers.
  • A tidy route for cables from the control box to all four strips.
  • A fused 12V source you are happy to wire into, or a spare lighter socket.
  • What your local rules say about underbody light on public roads.

The ELK-BLEDOM light family also covers acrylic dash kits and fibre-optic cabin lines, which pair well with underglow when you want the inside and outside to match.

Glow questions

Hook-up questions

Is the Xprite underglow kit waterproof?

Yes. The LEDs sit in flexible rubber tubing rated waterproof and built to resist road debris, heat and cold.

Which app controls the Xprite underglow lights?

Lotus Lantern, on iPhone and Android. A remote with 8 colours, 4 effects and 4 sound modes comes in the box too.

Do I have to wire the Xprite underglow into the car?

No. It can run from the included 12V cigarette-lighter adapter, or be wired to positive and negative leads. Use the included fuse holder either way.

Is underglow legal to use while driving?

It depends on where you drive. Many places restrict red or blue light, flashing, or any underglow on the road, so check local rules and keep effects for parked use.