Top lights
Neon rope · 20–60ft · Lotus Lantern

AILBTON IP67 Neon Strip Lights

Flexible RGB neon that bends into letters, waves and outlines, clips to the wall and glows in step with the room's music, sold in three lengths for a desk, a bedroom or a whole game room.

  • Lengths20ft, 50ft or 60ft
  • WaterproofIP67 neon, controller not waterproof
  • AppLotus Lantern over Bluetooth
  • MusicBuilt-in mic
  • MountingFixing clips, no adhesive back
  • ControlApp and remote, with timer
Lights up
  • DIY neon signs, words and shapes on a wall
  • Gaming and streaming setups that want a smooth glow
  • Choosing the exact length: 20ft, 50ft or 60ft
Pass on it for
  • Peel-and-stick installs: it mounts with clips only
  • Multi-colour chasing: the neon shows one colour at a time
  • A controller left out in the rain
See the glow
Lengths & sets

Pick the neon length

Gaming-room neon in 20ft, 50ft or 60ft

AILBTON sells its neon in three lengths, and that choice shapes the whole project. Twenty feet frames a desk and a monitor wall; fifty feet runs around a bedroom ceiling with enough left to write a word; sixty feet stretches across a game room or a basement bar. Every length carries the same Lotus Lantern controller, remote and built-in microphone.

Neon strip turns a line of LEDs into one smooth stroke of light. A diffused tube hides the individual chips, so the glow looks painted on the wall rather than dotted. In RGB, the whole length takes one colour at a time: electric blue behind a gaming chair, hot pink over a bar shelf, soft white for a calm evening.

Where each length tends to land:

  • 20ft: a desk outline, a mirror frame, a short word or a logo shape.
  • 50ft: a ceiling perimeter in a small bedroom, or a feature wall with a design.
  • 60ft: a long game room, a loft, or a covered patio edge.

Gamers and streamers are the natural crowd. A single steady colour lights a face evenly on camera and makes a room look finished in the background of a stream. Switch to music mode after the session and the same wall throws a party.

Measure the design before choosing. It is easier to hide a little spare neon than to stretch a run that comes up a foot short, and a cut piece beyond the controller stays dark. Remember the lead from the outlet too: the neon has to travel from the plug to where the design starts, and that stretch counts.

Light specs

Every wire and watt

SpecValue
Length50ft (20ft and 60ft also offered)
PiecesOne continuous roll
Light typeFlexible LED neon strip
ColourRGB, one colour at a time
AppLotus Lantern (iOS and Android)
ConnectionBluetooth
RemoteIncluded
Sound reactionBuilt-in microphone, reacts to surrounding sound
TimerTimer switch in the app
Water resistanceIP67 neon; controller not waterproof
MountingFixing clips; no self-adhesive backing
ShapingBends into shapes, cuttable to length
PowerLow-voltage DC controller
Rated power72W (50ft)
MaterialPlastic

Writing a DIY neon sign with AILBTON clips

This neon mounts with fixing clips, not tape, and AILBTON is clear that there is no self-adhesive back. That sounds like a drawback until the first sign goes up: clips hold tight curves exactly where they belong, and the neon does not creep off a warm wall in summer.

  1. Draw the word or shape at full size on paper, or mark it lightly on the wall with a pencil.
  2. Lay the neon along the drawing to count how much each letter uses.
  3. Place a clip at the start of every curve and at the end of every straight run.
  4. Press the neon into the clips a section at a time, bending gently rather than kinking.
  5. Test the colours before trimming the last few inches at a cut mark.

Joined script is easier than separate block letters, because one continuous run can write a whole word without cutting. Simple shapes such as a wave, a lightning bolt or a heart look sharp even for a first attempt. For letters that do not connect, the neon can travel behind a board or a canvas between them.

Many makers mount the design on a sheet of acrylic or plywood first, then hang the board. That keeps holes out of the wall and turns the sign into something that can move house.

Keep the controller dry. The neon itself is IP67 and happy near a sink or on a covered patio, but the controller is not waterproof. Park it indoors or in a sealed box, and keep the plug off wet floors.
  • Clips: needed at every bend.
  • Cutting: only at the marked points.
  • Backing board: optional, and renter-friendly.
Among its siblings

Where it glows in the lineup

ELK-BLEDOM light models by kind, September 2026. Highlighted: AILBTON IP67 Neon Strip Lights.

Waking up to AILBTON neon on the timer switch

Lotus Lantern does more than pick colours. Its timer switch can bring the neon on at a set time, and AILBTON pitches it as a partner to the morning alarm: the room fills with light as the phone rings. At night the same timer turns the glow off after you have fallen asleep.

The rest of the app covers the party side:

  • Colour and brightness for a static glow, from a dim night-light to full blaze.
  • Modes that fade, jump and flash the whole length at an adjustable speed.
  • Music sync, where the built-in mic reacts to surrounding sound.
  • Scenes to save a favourite look for gaming, films or friends.

The microphone listens to the room, not the phone, so it follows a TV, a speaker or a live guitar alike. Bass-heavy music drives the biggest changes, and a quiet conversation leaves the neon more settled.

ELK-BLEDOM means the neon's controller is ready. The name appears in Bluetooth scans because that is what the LED controller calls itself; it is not a speaker. Lotus Lantern handles the link without the phone's settings. The pairing steps help if it will not show up.

The remote covers everyone without the app. Guests can change the colour or the mode without a phone, and it keeps working when the app is closed. Pair the two and the neon runs as a quiet sunrise light on weekdays and a party wall at weekends. Nothing needs re-plugging between the two.

The Lotus Lantern guide shows where each of these settings lives.

Other moods

Three more ways to glow

One 50ft run, 1,080 LEDs1 SILFU RGB Neon Rope Lights
SILFU RGB Neon Rope Lights
SILFU's neon rope adds a 44-key remote and a 24V supply on Lotus Lantern.
  • Runs on the Lotus Lantern app
  • 50ft
  • Pulses to music from its own mic
See the glow

AILBTON clip-on neon next to SILFU and FBZ

Three neon ropes share Lotus Lantern with this one, and each fits a different job. AILBTON's strength is choice of length plus clip mounting that holds a DIY sign in shape. The others pull in different directions.

Pick this IP67 strip when the project is a sign, a desk outline or a single room, and the length needs to match closely. The 20ft roll avoids wasted neon on small designs, and the 60ft roll saves joining two short runs. Look to SILFU for a spec-heavy single 50ft run, and to FBZ when the plan leaves the house.

A few checks before ordering:

  • Measure the design and add a little for the route to the outlet.
  • Confirm there is a dry spot for the controller.
  • Accept clip mounting, or plan a backing board, since there is no adhesive.
  • Decide on one colour at a time versus a chasing effect, which needs an RGBIC strip instead.

Get those right and a wall of words or waves is an evening's work away.

Gift idea for a teenager's room: the 20ft roll, a sheet of plywood and their name in joined-up script. It makes a weekend project, and the result glows in whatever colour they pick that week.

Glow questions

Hook-up questions

Does the AILBTON neon have a sticky back?

No. It mounts with fixing clips only, which hold curves and letters firmly in place.

Which length should I buy?

20ft for a desk, mirror or short word; 50ft for a bedroom perimeter or a feature wall; 60ft for a large room or a covered patio. Measure the design first.

Can it go outdoors?

The neon is IP67, so it copes with rain on a covered patio. The controller is not waterproof and must stay dry.

Can it wake me up in the morning?

Yes. Set the timer switch in Lotus Lantern to turn the neon on with your alarm.